Isidambisi somthamo

Umbhobho

1. Izinto zensimbi zangaphandle ziyi-304 okanye i-316 insimbi engenasici.

2. Ngaphambi kokugubungela, i-substrate yensimbi engenasici ihlolwe ukuze kuqinisekiswe i-welds epheleleyo kunye nonyango olufanelekileyo lomhlaba.

3.Izinto zokugquma yi-ETFE fluoropolymer thermoplastic resin.

4. Ubunzima bokutya buphakathi kwe-260μ.

5. Ukusebenza kovavanyo lomngxuma we-pin olwenziwa yi-DC spark tester kwi-2.5KV/260μ ukuqinisekisa i-pin nole yokukhusela yokukhusela.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Uhlobo	Ububanzi (mm)	Ukutyeba (mm)	Ubude (mm)	Blade Material		Intshukumo
				sus	Coated
I-Propeller Blade Damper	Φ800-Φ1150	2.0	350	(SUS)	(PVDF)	IiOhms/ zomoya/ zoMbane
I-Propeller Blade Damper	Φ1200-Φ1600
I-Propeller Blade Damper	Φ1650-Φ2000

1. I-Volume Damper ye-welding bead kufuneka ihambe kakuhle, ukufezekisa i-welding ye-single-side kunye ne-double-sided forming, i-interior ifanele iphuculwe ngokugudileyo, ingabikho i-pores, kunye nomgca wokugoqa we-folding surface kufuneka ube flat (malunga ne-90 °).

2. Inxalenye yombhobho womoya oza kupeyintwa (kubandakanya i-flange surface ngaphakathi kumbhobho) kufuneka ikhutshwe ngesanti, i-sandblasting roughness kufuneka ihlangabezane noburhabaxa be-3.0 G/S76, 40μm okanye ngaphezulu, kunye namasuntswana esanti ashiyekileyo kunye nothuli lwesinyithi ngaphandle. umbhobho kufuneka ususwe emva kwesanti.Qinisekisa ukuba umphezulu we-workpiece ye-duct ucocekile kwaye i-workpiece igqunywe ngefoyile ye-aluminium.

I-3.100% yokuhlolwa komgangatho opheleleyo (ukubona ubukhulu befilimu, ukufunyanwa kwe-pinhole), kunye nomvavanyi wefilimu yobunzima bokubona ubukhulu befilimu.Ubukhulu befilimu yi-260±30 μm.Isixhobo sokujonga umngxuma sisetyenziselwa ukukhangela ukuba i-coating inemingxuma yokugquma.Lungisa i-voltage esemgangathweni yokufumanisa kwi-2.5KV, ukuba kukho iinaliti ezifuna ukulungiswa okanye ukulungiswa kwakhona.Ubunzima befilimu kunye neziphumo zovavanyo lwe-pinnhole emva kokuhlolwa komgangatho kufuneka zirekhodwe "kwiFom yokuHlola uMgangatho weDuct Coatung".

Idayamitha ye-4.Duct ngaphezulu kwe-2000mm iyafumaneka ngesicelo.Ukutyeba kombhobho kwakhiwe kwi-SMACNA.Kwaye ingatshintshwa njengesicelo somthengi.